| Radius | 5 miles | 10 miles | 20 miles | 30 miles | 50 miles |
|---|
| Location | Title | Company | Pay | Date |
|---|---|---|---|---|
|
|
||||
|
US CA Oceanside |
Design Engineer |
NORESCO | 7/30 | |
| Details: Energy – Design – Design Engineer Noresco has an immediate need for a Design Engineer in Irvine, CA As a Design Engineer at NORESCO, you’ll work with our Project Development team to ensure that final engineering designs will achieve savings guarantees and functional performance. You’ll also interact with other NORESCO internal groups to ensure their requirements have been incorporated into each design package. Teamwork is essential as every person on our team plays a vital role in the successful completion of every project we do. This is an opportunity to observe your design work actually accomplish what you intended it to accomplish. And your career path will be to grow and develop into a senior design role.  In order to be successful in the role of Design Engineer, you will need to perform the following tasks: Work closely with the Project Development team to write detailed scopes of work and design drawings to ensure each project can be priced by a turn-key design/build subcontractor. Coordinate with all internal departments to ensure requirements from M&V, O&M, Commissioning and analysis have been incorporated into the design packages. Manage Design Consultants during the implementation phase, ensuring the final design can achieve savings guarantees and functional performance. Review shop drawings and equipment submittals for conformance to the original design and customer requirements. Perform heating/cooling loads as well as piping and duct pressure calculations. Take direction from the Senior Energy Design Engineer, while taking the lead role on the smaller, less complicated measures. Travel up to 25% to project sites. | ||||
|
|
||||
|
US CA San Diego |
Design Engineer - English / Chinese Speaking |
Filtran LLC | 7/29 | |
| Details: The Design Engineer is responsible for designing products per the requirements agreed upon by the customer, account manager and the manufacturing team. The design must be optimized for manufacturability (cost and quality) and must be conducted per ISO/TS 16949 requirements (DFMEA, Gantt, TMR, PDR, etc.) and in conformance to Company design standards. The Design Engineer is responsible for conducting ECO's and engineering support as directed.The Design Engineer must determine design parameters (shape, thickness, configuration) based on functionality requirements. The Design Engineer must then incorporate these parameters into a design that they will present to the Design Engineering Manager for approval.The principal outputs of the Design Engineer include Pro/E CAD models, detailed assembly and component drawings (in Pro/E), bill of materials and other specifications as required for manufacturability. The Design Engineer will release engineering documents and CAD Models for prototype and production and will provide design support during these stages as required. The Design Engineer will track, via DVP&R and Technical Center reports, design validation requirements.Primary Accountabilities and Supporting Activities- Acquire a full understanding and knowledge of industry and product fundamentals by attending seminars, training, and collaborating with colleagues and customers- Manage assigned projects though design completion including establishing a timeline and updating project status- Facilitate team collaboration to meet customer requirements- Create detailed, production-ready models and drawings and coordinates product testing- Support and contribute to product innovation and generates new design ideas- Support Lean activities- Other duties and projects completed as assigned | ||||
|
|
||||
|
US CA Carlsbad |
Electrical Design Engineer |
Anchor Audio, Inc | 7/29 | |
| Details: Anchor Audio, the world’s leader in designing and manufacturing portable, professional sound systems, is looking for a creative engineer to join our team of professionals as we take innovative concepts from white paper to production. As an integral member of the new product development team, you will have the opportunity to make a lasting impact on the portable audio industry. | ||||
|
|
||||
|
US CA Vista |
Design Engineer II |
DJO | 7/29 | |
| Details: DJO is a leading global provider of high-quality, orthopedic devices, with a broad range of products used for rehabilitation, pain management and physical therapy. We also develop, manufacture and distribute a broad range of surgical reconstructive implant products. We are the largest non-surgical orthopedic rehabilitation device company in the United States and among the largest globally, as measured by revenues. Many of our products have leading market positions. We believe that our strong brand names, comprehensive range of products, focus on quality, innovation and customer service, extensive distribution network, and our strong relationships with orthopedic and physical therapy professionals have contributed to our leading market positions.DJO is a global provider of medical devices that provide solutions for musculoskeletal health, vascular health and pain management. We have an immediate opening for a Design Engineer II for our Global Headquarters in Vista, CA.Responsible for executing tasks of increasing complex scope to develop new and improve upon existing products. Tasks include project planning, detail design, analysis, process designs, testing, prototyping, documentation, material selection, and vendor liaison. Coordinates and manages smaller scope projects.Essential Job Functions:� Design increasingly complex assemblies, components and fixtures. Periodically conceive and develop novel product concepts that give the company a competitive advantage.� Fabricate, test, and evaluate prototypes and fabrication methods.� Work with Marketing to develop future product design specifications to insure products meet market requirements that are successful in the field.� Conduct material selection investigations and make results based recommendations.� Evaluate and compare alternate design approaches. Report, verbally or in writing, on the function and/or cost tradeoffs or other information as required.� Cost comparison of various design and process alternatives.� Investigate and make recommendations on component selection.� Evaluate and develop manufacturing methods and processes.� Document all work in accordance with established department procedures.� Provide engineering support for existing products.Headquartered in San Diego, CA (Vista), DJO Incorporated is a leading global provider of high-quality, orthopedic devices, with a broad range of products used for rehabilitation, regeneration, pain management and physical therapy sold through our DonJoy, Empi, CMF, Aircast / Procare, DJO Surgical, and Chattanooga Group business units.We are the largest non-surgical orthopedic rehabilitation device company in the United States and among the largest globally. We also develop, manufacture and distribute a broad range of surgical reconstructive implant products through our DJO Surgical business unit.We believe that our strong brand names, comprehensive range of products, focus on quality, innovation, customer service, extensive distribution network, and our strong relationships with orthopedic and physical therapy professionals have contributed to our leading market positions. | ||||
|
|
||||
|
US CA San Diego |
Electrical (Analog) Design Engineer |
Technisource | $40.00 - $50.00/Hour | 7/27 |
| Details: Electrical (Analog) Design Engineer Researches, develops, designs, and tests electrical components, equipment, and systems by performing the following duties. Designs electrical equipment, facilities, components, products, and systems for the plant locations. | ||||
|
|
||||
|
US CA San Diego |
RFIC Engineer - CMOS RFIC Engineer - RFIC Design Engineer - |
CyberCoders Engineering | $50.00 - $80.00/Hour | 7/26 |
| Details: This position is open as of 7/29/2010.RFIC Engineer - CMOS RFIC Engineer - RFIC Design Engineer - RFIC Designer - CMOS Designer - CadenceIf you are a RFIC CMOS Engineer with experience in Cadence tools? If so, please read on!This is a long term contract position in San Diego.What's in it for you:- Opportunity to work on cutting edge technology- Long term project experienceWhat you need for this position:- 5+ years RFIC CMOS circuit design- CadenceWhat you'll be doing:- Design RFIC solutions for rapidly expanding markets in the Communications IndustrySo, if you are a RFIC Engineer with experience experience in Cadence tools, please apply today! We are actively interviewing and this position will start within the next few weeks!Required SkillsCMOS, Cadence, RFIC Engineer, RFIC Engineer, CMOS RFIC Engineer, RFIC Design Engineer, RFIC Designer, CMOS Designer, Analog, Digital, Wireless, Communications, Consumer Electronics, Cellular, MobileIf you are a good fit for the RFIC Engineer - CMOS RFIC Engineer - RFIC Design Engineer - position, and have a background that includes:CMOS, Cadence, RFIC Engineer, RFIC Engineer, CMOS RFIC Engineer, RFIC Design Engineer, RFIC Designer, CMOS Designer, Analog, Digital, Wireless, Communications, Consumer Electronics, Cellular, Mobile and you are interested in working the following job types:Engineering, Information Technology, DesignWithin the following industries:Telecommunications, Electronics, Sales - MarketingOur privacy policy: Your resume and information will be kept completely confidential.Looking forward to receiving your resume through our website and going over the job in more detail with you! | ||||
|
|
||||
|
US CA Carlsbad |
Senior Design Engineer |
Acushnet Company | $70,000 - $80,000/Year | 7/23 |
| Details: Acushnet Company, home to the leading brands in golf (Titleist and FootJoy Golf) has an exciting opportunity for a Senior Design Engineer . In this position the incumbent will design golf club components using computer based tools and create product specification documentation such as engineering drawings, spec sheets, Cad models, Etc. Conduct engineering analysis of designs using computer based analysis tools. In addition, the incumbent will develop and/or follow design specifications to generate CAD models. Qualify CAD model integrity through prototyping and pre-production runs. Operate and/or possess knowledge of reverse engineering tools to expedite development and verify golf club models. Operate and/or possess knowledge of digital sculpting tools to expedite modeling. Maintain working knowledge of CAD programs, illustration programs, and spread sheets for effective communication with designers, suppliers, manufacturing, sales and marketing. Develop standards/templates to facilitate effective communication in accomplishing the product development goals - from concept through to production. Provide inspection forms and procedures. Link CAD model efforts with computer analysis tools for virtual performance analysis. Use computer based analysis techniques for expediting the determination of critical performance variables. | ||||
|
|
||||
|
US CA San Diego |
HPA Design Engineer |
Volt | 7/21 | |
| Details: HPA Design Engineer with High Frequency HPA design experience using GaS and GAN technology devices in the 1-30 GHz range for Military VSAT and Radar applications.Knowledge designing amplifiers for Pulse applications as well as VSAT Military applications is a must.Good strong knowledge of RF Test equipment including Spectrum Analyzers, VNA's and signal analyzers and procedures for testing FET devices required.Strong simulation skills using ADS is a must as well.Candidate will be responsible for all aspects of the amplifiers design.Candidate will participate in failure analysis, isolate problems and troubleshoot complex design problems encountered in deployed systems, find root causes and investigate difficult problems by simulation and lab testing.Work with mechanical team to design packaging and thermals.Build test and tune prototypes.At the RFI/RFQ phase, participate in the specific evaluation and in the drafting proposal (simulation, drafting, ICD).At the statement of work (SOW) phase, participate in specs and system budget negotiations.Produce technical reports (ITC reports, qualification reports, etc)Assume technical guidance to less experienced staff in all facets of design and hold design seminars to teach design techniques to other members of technical staff.Support production during builds.Volt is an EOE. | ||||
|
|
||||
|
US CA Carlsbad |
RF Design Engineer (4785) |
ViaSat, Inc. | 7/21 | |
| Details: LocationCarlsbad CAJob ResponsibilitiesDesign and implement complex RF circuit card assemblies within cost constraints and with sufficient margins to meet yield objectives.Responsible for design, analysis, schematic, layout and design verification effort. Support production transition.Experience/Skills RequiredPosition requires RF circuit design, analysis, schematic and layout experience. Extensive and broad RF test equipment experience and documentation in a production environment is essential. Previous high volume design experience is desirable. Exposure to RF Integrated Circuit design is desirable. Any applicable SW development skills desirable.  Education RequirementsBA/BS or equivalent experienceTravel RequiredNoneUS Citizenship Required?US Citizenship or Permanent Resident Status RequiredClearance Required?Secret clearance is a plusLocation Information | ||||
|
|
||||
|
US CA San Diego |
Design Assurance Manager FAA / DER |
7/17 | ||
| Details: Overall responsibility for managing all certification and continued airworthiness activities. Responsibilities include, but are not limited to: Creation and management of certification plans for all new programs requiring TSO approval; Maintenance of all certification records; Communication and coordination with the appropriate certification authorities for all in service programs; Management of the Life Management Programs; representative to the Product Safety Board. Understand and oversee the FAA Engineers. Approximate direct reports: 10 people This position will require occasional travel including international destinations in Europe, South America and Asia | ||||
|
|
||||
|
US CA Southern CA |
PACKAGING DESIGN ENGINEER |
MR - MRI of Baltimore Timonium | $70,000 - $85,000/Year | 7/17 |
| Details: This company, one of the leading medical device manufactures in the U.S., sells its products to thousands of surgeons throughout the country. With a focus on utilizing the most cost-effective measures that can be passed on to patients all over the world, their market share has steadily increased. At the forefront technologically, this dynamic, growing organization provides the ultimate resources and atmosphere for professionals to develop and realize their potential. If you're ready to take advantage of this exciting opportunity and take your career to the next level, apply now! | ||||
|
|
||||
|
US CA San Diego |
Manager - Product Design & Drafting |
Hamilton Sundstrand | 7/14 | |
| Details: Hamilton Sundstrand is among the largest global suppliers of technologically advanced aerospace and industrial products. We design and manufacture aerospace systems for commercial, regional, corporate and military aircraft and are a major supplier for international space programs. Our industrial products serve industries ranging from hydrocarbon, chemical and food processing to construction and mining. This position is for a newly created, challenging, and rewarding position leading a gas turbine engineering department at Hamilton Sundstrand Power Systems (HSPS) - maker of Auxiliary Power Units for commercial and military airborne platforms. HSPS, located in San Diego California, has a product line which is diverse, rapidly expanding, and ranges across fixed and rotary aircraft of all sizes and OEM'. Our unique business and organization structure offers the enthusiastic leader the ability to impact the engineering process through all phases of development, qualification, production and aftermarket.The position being offered is for Engineering Manager for the Product Design and Drafting department, responsible for the overall support of design and drafting needs for APU and Fans products as well as the Configuration Managment and Engineering Data Managment Departments.This is a working management position requiring individual technical and leadership contributions along with traditional management responsibilities.Responsibilities include: Technical ownership, guidance, and oversight of all product definition aspects of APU' and Fans. This encompasses the entire lifespan of the product from conceptual design to fielded products. It also manages both the Engineering Data Management group and the Configuration Management group. Ownership and oversight of the Engineering Change process and products and all drafting procedures. Provide technical ownership and leadership of design/drafting tools and procedures. Provide technical guidance on drawing layouts, drafting standards, and GD&T practices. In conjunction with Discipline Chiefs, continuously develop, improve, and follow Standard Work. Develop staff through hiring, mentoring, training, and outsourcing. Coordinate staffing plans and demands. Work with IPTL' and the Tiger system to understand, load, and meet staffing demands. Execute the assigned engineering task to meet agreed to technical, schedule, and cost targets. Provide cost and schedule estimates and scope definition on tasks and business proposals. Assist IPTL' with task-level data used to develop the detailed project plan. Develop and maintain cost/schedule basis of estimates through use of standardized WBS. Utilize ACE system to continuously improve departmental performance. Ensure department level Earned Value metrics are properly tracked and expected performance is achieved Coordinate with large manufacturing base to optimize design Execute all departmental staff management and administrative needs. | ||||
|
|
||||
|
US CA San Marcos & Mission Valley Locations |
Design Consultant |
Thomasville of San Diego | 7/13 | |
| Details: Thomasville is seeking talented Design Consultants to deliver an outstanding retail experience to our customers. San Marcos & Mission Valley locations are now accepting resumes!If you have desire, drive and a passion for great design, come grow with Thomasville!We have the blueprint for your success. It starts with a terrific assortment of home furnishing – from our famous quality wood and upholstery products to lamps, rugs, bedding, top-of-bed, accessories and soft goods. It shapes and guides your unique talent and experience, resulting in beautiful rooms, happy customers and terrific earning potential for you. | ||||
|
|
||||
|
US CA San Diego |
Interior Design Project Manager |
Omega Group | $60,000 - $80,000/Year | 7/6 |
| Details: Interior Design Project ManagerThe Interior Design Project Manager reports to the Senior Project Manager and is responsible for overseeing project operations while ensuring delivery schedules, budgets and client expectations are met. The incumbent coordinates efforts between clients, teaming partners and company staff while facilitating positive relations among all stakeholders. This position requires the incumbent to make independent and discretionary decisions and to work independently with minimal supervision and guidance. The incumbent spends at least 51% of his/her time performing exempt work. Execution of duties typically occurs at Government or commercial Client sites and requires incumbent to follow Client customs and protocols. This job description reflects management’s assignment of Responsibilities; it does not prescribe or restrict the tasks that may be assigned. Responsibilities: Read and interpret construction documents, furniture/fixture & equipment specifications. Develop detailed furniture/equipment installation drawings. Manage and coordinate vendors and procurement needs. Prepare delivery schedules, and necessary CAD drawings. Engage and interact with all levels of Clients, General Contractors, Architects, and support staff. Able to travel regularly to project sites. Evaluates contract specifications upon award to develop project plans, objectives and milestones. Manages and monitors multiple projects simultaneously ensuring goals and contract delivery schedules are attained. Leads team members to ensure projects are completed on time and with quality results. Monitors day-to-day performance of assigned staff.  Oversees sub-contractors that are directly involved in the assigned work product. Advises senior management of potential problems and assists in resolving such problems. Provide feedback to on project status reporting on any issues (both positive and negative) which impact time lines and outcomes. Interfaces with clients, activities and field agencies via face-to-face meetings, telephone and correspondence to collect required data and information essential to project development. Participates in monitoring staffing levels and estimates resource requirements. Seeks to improve work product efficiencies and pursues quality improvement initiatives. | ||||
|
|
||||
|
US CA Carlsbad |
Project Engineer - Water/Wastewater Design (Carlsbad) |
Malcolm Pirnie | 7/5 | |
| Details: Malcolm Pirnie, Inc is seeking a Project Engineer for our Carlsbad office. This person will perform project engineering and project management duties and will lead engineers developing detailed design documents for municipal water/wastewater treatment facilities. The ideal candidate will complement the current water/wastewater Treatment Plant Design group in California by providing additional project engineering and management depth with detailed design engineering skills. | ||||
|
|
||||
|
US CA San Diego |
Catia V5 Design Engineer |
Global Technology Associates, Ltd. | 7/2 | |
| Details: Catia V5 Design Engineer | ||||
|
|
||||
SanteeCalifornia.com
HOTELS • REAL ESTATE • JOBS